Stamped and ready to go!

This SBPF208-24 bearing is in a stamp steel housing ready to be installed. This housing is thinner than the cast iron housing and more affordable. There are 3 square holes on the outer part of the housing for installation. The bearing itself has a set screw to hold the shaft in place after mounting.

 

http://www.vxb.com/page/bearings/PROD/Kit13712

Here are the specs of the SBPF208-24 Pressed Steel Housing Bearing 3-Bolt Flanged Mounted:

Item: SBPF208-24 Bearing

Type: Pressed Steel Housing Unit

Shaft Diameter: 1 1/2" Inch

Bolt Size: 1/2" Inch

Bearing No: SB208-24

Housing No: PF208

Quantity: One Bearing

The electric slide was not built on this unit

The electric slide was not built on this unit, but it should have been! Our 20mm aluminum slide unit is one of our most popular items for those looking to build their own linear system. Our featured slide unit is open, making it perfect for a supported shaft. This block has a pre installed 20mm linear bushing and has 4 threaded mounting holes on top ready for installation. The block, itself, is made of durable aluminum. http://www.vxb.com/page/bearings/PROD/LM/Kit8306

Shaft Diameter	D	H	E	T	F	G	W	B	C	L	S
20mm	32	20.99	34	10	31.4	52.4	68	37	54	51	M6

How hot are you running Mr. Bearing?

How hot are you running Mr. Bearing? Find out with our infrared digital thermometer! This digital thermometer uses a laser pointer to measure the heat that is being produced by the bearing. This handy tool helps you ensure your bearing isn’t running in higher temperatures than allowed. The thermometer has the capacity to measure temperatures of -50 to 380º C. It measures 155mm x 80mm x 40mm, find more information about the Infrared Digital Thermometer at http://www.vxb.com/page/bearings/PROD/Kit12519 .

Here are the specs that nobody reads :)

Laser Targeting

• Red Laser Power : less than 0.5 MW
• LCD with Back Light
• Celsius/Fahrenheit Select Switch
• Laser ON/OFF switch
• Automatic Power Off
• Display functions

Specification:

• Temperature range: -50~380 Celsius (-58 ~ 716 Fahrenheit)
• Accuracy: 2% or 2 Celsius
• Resolution: 0.1 Celsius (0.1 Fahrenheit)
• Response time: Less than or equal 0.8s
• Emissivity: 0.95 Fixed
• Distance to Spot Ratio: 8:1
• Spectral Response: 5-14um
• Storage temperature: -20~50 Celsius (-4~122 Fahrenheit)
• Operating temperature: 0~50 Celsius (32~122 Fahrenheit)

 

 

The wheels on the bus go round and round, round and round

 

The wheels on the bus go round and round, round and round; unless the bus needs new wheel bearings! We carry wheel bearings for all car makes and models. The featured bearing is for several Honda models. It is composed of Chrome steel inner and outer race, chrome steel cage, and ball bearing. The bearing is sealed on both sides to protect the bearing from contamination. The double row bearing allows for higher load capacity. For more information on this, or any other bearing, contact us! http://www.vxb.com/page/bearings/PROD/kit8409

Fits the following cars:

ACURA INTEGRA (1986-1989)

HONDA CIVIC (1984-1991)

HONDA CIVIC WAGON 4WD (1984-1991)

HONDA CRX (1988-1991)

HONDA CRX (1500DX) (1984-1987)

HONDA CRX (1500SI) (1985-1987

Need a compliment? Buy yourself a full complement bearing!

Need a compliment? Buy yourself a full complement bearing! This single-row, unground ball bearing is perfect for applications supporting moderate loads and low speed. Another benefit to a full compliment bearing is their ability to carry higher radial load more than caged bearings. The flange in this bearing allows for easier mounting and it holds the bearing in place. This bearing's dimensions are 1/4" x 13/16" x 5/16", for more information, visit http://www.vxb.com/page/bearings/PROD/Kit14205

 

When female and male come together..

 

Our rod ends are used in multiple applications. For example, they are used in cars, machinery, etc..  http://www.vxb.com/page/bearings/PROD/Kit12667 Need high strength and ductility performance? This is the item for you!

Need to re-lubricate? No problem! The zinc fitting is designed for lubrication. The PHSB7L (pictured in the top right) is our female left handed rod end. The POSB8L (pictured in the bottom right) is our male left handed rod end.

This gloomy day made me lazy and therefore I shall share about these lazy susan bearings.

This gloomy day made me lazy and therefore I shall share about these lazy susan bearings. We definitely live in a time of comfort and accessibility. These lazy susan bearings are found in swivel chairs, bar stools, lazy boys, ect. We have heard of people making their own projects with them such as attaching them to television consuls, book cases, coat hanger, etc. These featured lazy susans are made of zinc plating and are pre drilled, ready for mounting. for more information, please click on the following search link:

http://www.vxb.com/SRCH.html?Store_Code=bearings&Search=lazy+susan+zinc+square

Big ball, little balls, foam, and housing!

 

Big ball, little balls, foam, and housing; these are all the components of this transfer unit. The NCBT-1 ½” transfer unit is composed of a nylon main ball, ninety 3/16” small ball bearings, and stainless steel housing for additional corrosion resistance. Transfer units are used in factories to move product along assembly lines, however lately many people have come up with creative ideas on including these transfer units in their projects. A neoprene cushion is included with this featured transfer unit, to permit vertical deflection and assist with uniform load distribution, for more information about the NCBT-1 ½” Stainless Steel Flange Transfer Unit, please visit http://www.vxb.com/page/bearings/PROD/Kit12392

Our ceramic bearings get along!

Our ceramic bearings get along, there is no friction there…! True statement, full ceramic bearings produce the least amount of friction possible making them perfect for high speed applications. These bearings are made to be used in applications with high humidity, high heat, and light load. Ceramic is in fact brittle so any kind of vibration or impact can damage the bearing. The featured bearing measures 9mm x 17mm x 5mm and has a PTFE cage. For more information on this bearing, contact us, we are happy to help. http://www.vxb.com/page/bearings/PROD/CeramicBallBearings/Kit8327

They see me rolling, they hating, they want to catch me riding dirty…

“They see me rolling, they hating, they want to catch me riding dirty…” Well they won’t catch these bearings riding dirty! Shiny and polished, these 5/8” loose ball bearings are often used in art pieces. You can use these loose bearings in pretty much any application in need of loose bearings, to replace damaged bearings, or even to create your own application; get creative! The loose bearings are solid 52100 chrome steel. We offer different sphericity options from G5 and up, for more information, please visit http://www.vxb.com/page/bearings/PROD/Kit11934